How to use a small road roller

1. Check the overall appearance of the small roller, including whether the tires, tracks, brakes, brake pads, fenders, switches, fuel tanks, water tanks and other components are complete, and whether there is obvious damage or wear. If there are abnormalities, relevant parts need to be repaired or replaced in time.
2. Before using the small roller, it needs to be filled with oil and water. The oil leached from the oil should be kept as clean as possible to ensure that the oil is clean and in good condition. Sufficient amount of water should be added to the water tank so that the roller can be cooled down in time during use and ensure normal operation of the engine temperature.
3. Before using the small roller, you need to loosen its cantilever brake and turn on the start switch to accelerate the operation to allow the engine to warm up. After the engine is hot, you can adjust the speed of the small roller and enter the formal operating state.
4. Before using a small roller, it is necessary to conduct simple operation training and understand the relevant operating specifications, techniques and precautions. During use, special attention should be paid to production safety to ensure the safety of yourself and others.
5. In actual operations, it is necessary to master the operating skills and apply appropriate pressure to the small roller in order to achieve different types of construction needs. The basic principle is to continuously reduce coating particles and keep the surface smooth and uniform while reducing particles.