Maintenance and maintenance of small skid steer loaders

1. Maintenance requirements
Small skid steer loader maintenance personnel must undergo professional training. When the vehicle is being maintained or repaired, no one is allowed to enter the work area. If necessary, please find a dedicated person to guard it. If the vehicle is being repaired, you should formulate operating procedures before assembling and disassembling parts and components, and know the steps of assembly or disassembly. Never blindly operate to prevent safety problems caused by improper assembly or disassembly. Use tools correctly and do not use damaged or low-quality tools.
If you need to check or troubleshoot without turning off the engine, remember to pull the handbrake and lock the door. If necessary, have a designated person guard the cab. If a small skid steer loader is to be used for under-vehicle operations, a prohibition label or other warning label must be placed on the starting switch and instrument panel to prevent unrelated personnel from starting the engine or operating the joystick and causing maintenance. Life brings surprises. When changing oil, it should be done in an environment without open flames to avoid causing fire. After disassembly, spare parts should be placed in a safe designated place, and no one is allowed to enter the work area. This can prevent the loss of spare parts and ensure the safety of unrelated personnel. security issues.
2. Precautions for maintenance and repair
1. Cleaning: Before maintenance and repair, the small skid steer loader should be cleaned to prevent dust, sand and other dirt from entering the machine, and at the same time, it can also ensure safe maintenance or repair. If the machine is very dirty, it will be difficult to find the problem. During maintenance work, dirt may splash into the eyes or the machine may slip because of oil.
2. Do not work in a closed environment: The exhaust gas generated by the engine is harmful gas. If used in a sealed environment, it may cause excessive inhalation of harmful gases and cause harm to the human body. Therefore, if the small skid steer loader works in a closed environment, it is necessary to Use an exhaust device to remove harmful gases, or open doors and windows for ventilation.
3. Work under the machine: If the small skid steer loader needs to enter the bottom of the machine for inspection, be sure to park the vehicle on a solid flat ground. Remember to enter the bottom of the machine on uneven ground. Before entering the bottom of the vehicle, remove the entire vehicle. All working devices are lowered to the ground, and then the tires are fixed with square logs. If the tires need to be lifted off the ground, remember not to rely solely on the bucket for support. There must be a jack and square logs under the tires to fix them at the same time. On the other side of the vehicle, On the one hand, it is forbidden for people to stand, and if necessary, find a special person to guard it to prevent accidents caused by vehicle rollover.
4. Roof work: When performing maintenance on the roof, make sure the footing is clean and free of obstacles, and there must be no spilled oil. Never jump directly from the roof. Use the ladder and handrails on the vehicle when getting on and off the roof. Wear protective measures when necessary. The top of the tire is relatively smooth, so don't stand. Be sure to stand firm and grasp the number. Pay special attention to oil stains. Don't have accidents caused by stepping on oil stains or slippery soles of your feet.