Small road rollers are a common type of machinery on construction sites. Sometimes, before construction, there will be situations where they cannot be started. The most direct consequence of failure to start and stop the machinery is to delay the construction period. Therefore, when this happens, it must be done as soon as possible. solve. If you don't know how to solve it, read the following to understand.
First, check whether the battery is dead. If it has not been used for a long time in winter, the cold temperature in winter will cause the power in the battery to be exhausted. In this case, use the battery to start the small roller, and then Connect the wires back to the battery, as the battery will automatically be charged while the machine is running. In fact, the main reason that the battery is dead is that the capacity is reduced due to improper maintenance. Next time we will teach you how to maintain the battery.
If there is no problem with the battery, there may be a problem with the circuit. Check all the circuits to see if the circuit is aging and burnt out, or the wire is not fastened and fell off, resulting in the starter not getting the command, resulting in the failure to start.
The last reason is that the starter is broken. When checking the starter, press the start button, and then observe whether the starter has any signs of ignition. If the starter has no signs of ignition, replace it immediately.
