What are the serious consequences of not changing the engine oil on time?
1. Failure to change the oil on time will lead to the fault of low oil pressure. The direct consequence of too low oil pressure is that it will cause semi dry friction or dry friction between various mating parts, and the engine will make obvious abnormal noise, and even cause Bush burning in serious cases.
2. Failure to change the engine oil on time will also lead to the problem of high oil pressure. High oil pressure will lead to premature damage of the gasoline filter and carbon deposition in the engine cylinder. It will also reduce the service life of the engine.
3. If the engine oil is not replaced on time, there will be too much sludge. Oil sludge is generally caused by the high-pressure unburned gas, acid, water, sulfur and nitrogen oxides in the combustion chamber entering the crankcase oil through the gap between the piston ring and the cylinder wall, and then mixing with the metal powder produced by the wear of parts, slowly accumulating, and then forming oil sludge.
4. If the engine oil is not changed on time, the serious consequence is the wear of various mechanical parts of the engine, such as piston and cylinder barrel. Once there is a problem with the piston and cylinder barrel, the machine needs to be overhauled, and overhauling is something that every machine owner does not want to see.
5. If the engine oil is not replaced on time, the water temperature will be too high. As mentioned above, if the engine oil is not changed on time, the oil storage will be too small, resulting in no or little oil in the lubrication system. At this time, all mechanical components of the engine will be in a semi dry friction or dry friction state.
It can be seen that it is very important to change the engine oil on time. If it is not replaced in time, it will accelerate the wear of parts, affect the service life, and even lead to the overhaul of the machine. What is more serious is that the sudden cylinder pulling and other problems during the working process will lead to safety problems
