What are the operating procedures that paver machines must follow?

1. Paver operators must undergo professional training to understand the mechanical performance and structure, master maintenance knowledge, and be proficient in the performance, operation essentials and safety matters of the machine. They can only operate alone after being confirmed qualified by relevant departments.
2. Before starting the engine, you must check: whether the amount of oil (engine oil, fuel, working oil, lubricating oil) is sufficient, the tightness of the belt on the fan, whether there is oil leakage and whether there are loose parts. Check that all accessories, attachments, tools, etc. required for the day's work are available.
3. After starting the engine, run it at idle speed for at least two minutes and then check whether the indicators of each monitoring system are normal.
4. The material transport vehicle must be directed by someone to unload the material accurately into the machine hopper.
5. Before working on the paver, you must get in touch with the leveling personnel on the left and right to ensure that other personnel are not involved in the operation.
6. When switching from working gear to driving gear, it must be done with a small throttle, after the machine has completely stopped, and all working parts have stopped working.
7. Operators are strictly prohibited from operating under the influence of alcohol. They must be neatly dressed when operating the equipment. They are not allowed to wear slippers and are not allowed to smoke, eat or engage in other behaviors that hinder safe operation.
8. After the paver is working, all protective devices must be installed in the designated positions.
9. The operating room (station) must be kept clean, oil and other dirt should be cleaned up in a timely manner, and tools and other items must not be left indiscriminately.
10. Before leaving the operating console, the driver must put all operating mechanisms in the "0" position.
11. When widening the hydraulic automatic widening paver, you must pay attention and observe the surrounding conditions to avoid injury and damage to the equipment.
12. When the paving is heated by a liquefied gas tank, the tank valve must be closed in case of flameout or fire. When the ambient temperature is higher than 200C or the car's gas tank is exposed to direct sunlight, the gas tank must be covered.
13. After paving, the screed must be placed on the skids when cleaning the material conveying and tamping devices and stopping the machine. Traffic must not be obstructed when the machine is parked, and warning signs should be placed. Run the engine at idle for 5 minutes before shutting down, then cut off the power supply and lock the instrument panel.
14. Equipment maintenance must be carried out in accordance with the requirements in the instruction manual.
15. When maintaining equipment, it must be: (1) The hopper and screed are firmly fixed. (2) The engine stalls. (3) When repairing the hydraulic system, the residual pressure of the hydraulic system must be released