Basic operating steps of Mini Ride On Road Roller

1. Preparation: Make sure the mechanical parts of the mini roller are operating normally, the fuel and lubricating oil are sufficient, and the tires or rollers are clean.
2. Adjust the roller: According to the work requirements, adjust the pressure and vibration frequency of the mini roller or tires. Adjustment of these parameters can be carried out according to the ground type and the required compaction effect.
3. Start compaction: Move the mini roller to the area that needs compaction to ensure the safety of the operating area. Forward or reverse movement can be selected as required.
4. Control direction: Use the joystick or steering wheel to control the movement direction of the mini roller. Ensure smooth operation and follow local traffic regulations.
5. Compacting the ground: Compacting loose materials on the ground through the weight and vibration of rollers or tires. When performing compaction, the vibration frequency and pressure can be appropriately adjusted to achieve the desired effect.
6. Inspection work: Stop regularly to check the compaction effect to ensure that the ground is evenly compacted and there are no obvious depressions or bulges.
7. Completion of work: When compaction is complete, stop the movement of the mini roller and turn off the engine. Clean the debris from the machine and perform necessary maintenance and upkeep.