Mini Ride On Road Roller care and maintenance

1. Cleaning: Regularly clean the exterior surfaces of the roller and the interior of the machine. Use clean water and a mild detergent to remove dust, grease and other dirt.
2. Lubrication: Ensure that all lubrication points of the roller are properly lubricated. Use the appropriate lubricant according to the manufacturer's recommendations and regularly check the operation of the lubrication system.
3. Adjust tire pressure: Keep the tire pressure of the road roller within the appropriate range. Tire pressure that is too high or too low will affect its performance and stability.
4. Check the electrical system: Regularly check the electrical system of the roller to ensure that components such as wires, plugs, and switches are not damaged or worn. Repair or replace any defective parts.
5. Check fluid levels: Regularly check and maintain the correct levels of fluids (such as fuel, lubricants, hydraulic oil, etc.). Make sure the fluid is clean and replace as needed.
6. Regularly inspect and replace filters: Filter cleaning and replacement are critical to maintaining the normal operation of your roller. Check and replace air, fuel and hydraulic filters regularly.
7. Check and adjust the transmission system: Regularly check and adjust the transmission system of the roller, including transmission belts, chains, gears, etc. Make sure they are in correct tension and alignment.
8. Regularly check and adjust blades and rollers: Make sure the blades and rollers are in good working order. Check the blade for wear and replace it in time. Adjust the rollers to ensure good compaction.