1. Start the equipment:
Make sure the equipment is placed on a flat ground and check the oil level of fuel, lubricating oil and hydraulic oil before starting.
Start the engine and check whether the equipment is operating normally and whether there is any abnormal vibration or noise.
2. Operate the equipment:
Move the equipment slowly to ensure that the vibrating plate is in close contact with the ground.
Adjust the vibration frequency and moving speed according to the properties of the material and construction requirements.
For different types of soil, multiple round trips may be required to ensure uniform compaction.
3. Stop the equipment:
After completing the operation, turn off the engine and clean the residue on the surface of the equipment.
When storing the equipment, choose a dry and ventilated environment to prevent the equipment from getting damp or corroded.
