Daily maintenance of walk-behind small road rollers
No matter what equipment is used for a long time without maintenance, it will cause damage to the equipment, and may also shorten the life of the machine. Only proper maintenance will prolong the service life of the equipment. Walk-behind rollers are many road rollers. One of them is mainly used for the compaction and leveling of ditch foundations, roads and sports venues, and can also be used for compacting asphalt surfaces. It has a small working radius and can work in a narrow range, which is more suitable for trenches. Backfilling, so it is favored by customers. The following editor will share the key points of daily maintenance of walk-behind rollers:
1. Always check whether the mounting bolts of the filter, valve, motor, oil pump, oil cylinder, etc. are loose, and whether there is oil leakage at each joint.
2. Regularly check the oil, fuel and hydraulic oil quantities of the walk-behind roller engine and add new oil to the required oil mark marking scale according to regulations;
3. Observe the oil level gauge on the side of the oil tank of the walk-behind roller. When the hydraulic oil is too low, the hydraulic oil of the same brand should be added.
4. The hydraulic oil tank needs to be cleaned and changed every 6 months. When adding or changing hydraulic oil, special attention must be paid not to mix impurities and dirt into the oil tank.
5. Fill each lubricating nipple with calcium-based grease in time to ensure that the equipment is adequately lubricated, and check the nozzles, joints and filters of the sprinkler system, and clean the walk-behind rollers on time.
