I. Daily Inspection (Before Daily Operation)
Visual Inspection: Check the spray nozzles for cracks or deformation.
Connection Inspection: Ensure the spray hose connections are secure and not loose.
Spray Test: Confirm that the spray is even and unobstructed.
II. Regular Maintenance (Monthly)
Comprehensive Inspection: Recheck the appearance, connections, and spray condition.
Cleaning and Maintenance: Remove mud, sand, weeds, and other debris from the spray nozzles.
Sealing Inspection: Replace the sealing rings immediately if leaks are found.
III. Troubleshooting
Uneven Spray: Immediately unclog the spray nozzles.
Component Damage: Replace spray nozzles with cracks or deformation.
Loose Connections: Tighten the spray hoses promptly.
IV. Seasonal Maintenance
Winter Freeze Prevention: Drain the system of accumulated water to prevent freezing and cracking.
Low Temperature Protection: Add low-temperature wiper fluid if necessary.
V. Operating Procedures
Before Start-up: Check the liquid level in the pump and ensure the valves are open.
During Operation: Monitor the pressure gauge reading and prevent cavitation.
After Shutdown: Close the valves and drain any accumulated water.
