I. Check Instruments and Alarms
Fault Codes: If the road roller has a self-diagnostic system (such as Runxin Technology's overload detector), directly check the fault codes on the display screen to quickly pinpoint the problematic module.
Dashboard: Observe whether any abnormal indicator lights are illuminated, such as low hydraulic system pressure or engine overheating.
II. Subsystem Troubleshooting
1. Engine Faults
Difficulty starting: First check the battery voltage (normally around 12V), then check if the fuel is sufficient, if the spark plugs are carbonized, and if the air filter is clogged.
Insufficient power: Clean or replace the air filter and fuel filter, and check the fuel injectors and cylinder pressure.
2. Hydraulic System Faults
Abnormal sounds or leaks: Check the hydraulic oil level and quality, repair damaged oil pipes, and tighten loose joints.
Vibration wheel not vibrating: Check the vibration solenoid, fuse, vibration pressure, etc.
3. Electrical System Faults
Instrument not working: Check fuses and wiring.
Vibration wheel not vibrating: Check vibration switch and wiring.
4. Vibration Wheel Faults
No vibration or abnormal amplitude: Replace damaged coupling, bearings, or amplitude adjustment device.
III. Professional Tools
Hydraulic System Tester: Such as a portable tester, which can detect pressure, flow, and stability, suitable for troubleshooting hydraulic systems.
Fault Code Manual: Refer to the fault codes in the equipment manual to quickly locate the problem.
IV. Daily Maintenance and Prevention
Regular Inspections: Clean battery terminals, replace filters, and check circuit connections.
Standardized Operation: Sound the horn before starting to avoid three consecutive failed starts.







