Vibratory rollers rely on the combined action of static pressure and vibratory force to compact materials. The vibratory roller can be divided into walking type and self-propelled type according to the walking method. Generally, the self-propelled type is commonly used. So what are the safety factors for operating vibratory rollers? Let's introduce it to you by Xiaobian.
1. When changing the driving speed, the main clutch or reverse clutch must be disconnected first, and then the shift handle can be pulled to shift.
2. When changing the driving direction, first turn the backward handle from the forward (backward) position to the middle position, and then pull the handle to the backward (forward) position after the machine stops stably. Do not pull down the position at one time to prevent sudden rotation and damage to the machine.
3. If the reversing clutch or the starting clutch slips during operation, stop and separate the main clutch immediately, check, adjust and eliminate the faults of the reversing clutch or the starting clutch. Please do not increase the throttle. If you try to drive with high speed and power, otherwise the clutch plates will burn out.
4. When rolling loose materials, it is required to press them for 1-2 times before vibratory compaction.
5. The starting or stopping vibration of the roller shall be carried out during operation to avoid damage to the road surface. It is forbidden to start vibration from a hard surface to avoid damaging the shock absorber or other components.
6. High speed gear can be used for short-distance transfer on flat roads, but if the distance is far, it needs to be carried by other means of transport.
7. When the roller goes up and down the slope, it must change the low-speed gear in advance, and it is forbidden to go up and down the slope at high speed.
8. When rolling at high speed, it is forbidden to turn on the vibrating device.
