Wuxi Hengwang Zhaoye Machinery Co., Ltd.

Good Maintenance Is in Hand, So You Don't Worry That The Small Roller Can't Survive The Winter

May 11, 2022

The small roller has a small shape. Although it is not as efficient as the large roller, it can complete tasks that the large roller cannot complete. If you don't know this well, don't worry, because next, our experts shared with you the maintenance methods of the small roller. If you don't know this well, let's take a look at the article below.

Clean the vehicle body and clean the inside and outside of the small roller, including engine, gearbox, hydraulic pump, oil pipe connection and other components.

1、 Maintenance method of small roller

1. Clean the vehicle body, clean the inside and outside of the small roller, including the engine, gearbox, hydraulic pump, oil pipe connection and other components, wash the water tank, oil hydraulic oil radiator, cylinder head radiator and cooling channel, so as to monitor whether there is leakage and help strengthen heat dissipation;

2. Pay attention to observe whether the bolts at the connecting parts of the small roller are complete, loose or missing, such as the engine claw bolts, transmission shaft bolts, gearbox fixing bolts, etc. tighten the loose bolts in time and supplement the missing bolts;

3. List the faults of small rollers in a table, and eliminate them item by item. The principle is from easy to difficult. It is recommended to select original accessories within the three guarantee period, and the supporting quality can be guaranteed. Remember to ensure the maintenance quality and avoid the same fault. In particular, hidden trouble shall be found and handled in time; At the same time, the small roller shall be maintained. The antifreeze engine oil, gear oil, hydraulic oil and coolant of the roller shall be replaced on time according to the requirements of the operation manual. Replace engine oil filter element, diesel oil filter element, hydraulic oil filter element and hydraulic transmission oil filter element as required.

The above content mainly tells you about the maintenance methods of small rollers. I hope this section can help you solve some problems. If you have other problems to understand, you can leave a message to Xiaobian and thank you for your support.

goTop