Safety Standard System For The Use Of Small Road Rollers

1. Operators must hold a certificate to work, and non-driver operations are strictly prohibited. Do not leave the post without permission during work, do not operate machinery that does not conform to the operation certificate, strictly prohibit the operation of machinery and equipment to personnel without the operation certificate of this type, and strictly prohibit operation after drinking;
2. Before each operation, check whether the lubricating oil, fuel oil and water are sufficient, whether various instruments are normal, whether the transmission system and working devices are in good condition, and whether there is any leakage in the hydraulic system and various pipelines. After confirming that they are normal, they can start;
3. The operator must strictly implement the pre-work inspection system, pay attention to observation during work and the inspection and maintenance system after work in accordance with the regulations of the machine manual;
4. The cab or operating room should be kept clean, and it is strictly forbidden to store flammable and explosive items. It is strictly forbidden to wear slippers, smoke and work after drinking, and it is strictly forbidden to run the machine with failure or overload;
5. When parking machinery and equipment on the construction site, choose a safe parking place, lock the cab (operating room) door, and pull the parking brake. When parking on a ramp, use triangular wood or stones to hold it Wheels should be guarded by special personnel at night;
6. For water-cooled machinery, when the temperature is lower than 0°C, water should be released in time after work, or other antifreeze measures should be taken to prevent the body from freezing and cracking;
7. During construction, the underground obstacles on the site must be marked first, and a special person shall be assigned to direct the construction of the machinery to ensure the safety of underground obstacles and mechanical equipment;
8. Before the operation, the operating driver and the construction team leader must fully study and understand the content explained by the technical person in charge. If they do not understand or are unclear, they should inquire in time. Among them, the operating driver and the construction team leader must clearly remember the types and positions of obstacles underground, on the ground and in the air at the workplace (including: height of filling and excavation, slope slope, underground cables, height of surrounding wires, various pipes, pits, etc.) and various obstacles, etc.), the construction at this location must obey the command of the construction captain, and no operation without command is strictly prohibited;
9. Non-construction personnel are strictly prohibited from entering the construction area during the operation, and construction personnel are strictly prohibited from chasing and fighting when entering the construction site;
10. When personnel and machines are cooperating in construction, personnel are not allowed to stand on the working surface in front of the machine, but must stand outside the working surface of the machine. When the road roller needs to manually clean the soil on the wheel, the labor should be on the side of the road roller. For rear cleaning, it is strictly forbidden to reverse and clean up along the forward direction of the road roller, so as to prevent personal injury and death accidents caused by tripping when retreating.