1. The engine of a small road roller must undergo long-term technical maintenance according to the instruction manual to prevent rust and perform some treatment. And remove the battery from the small roller, clean the outside of the battery, check the electrolyte level, and remember to charge it once a month.
2. Clean the body of the small roller. If conditions permit, it must be parked in the warehouse. If it cannot be parked in the warehouse, it must be parked in a ventilated place and covered with canvas.
3. Pad the front and rear workshops in parallel, and adjust the thickness of the pads until the shock-absorbing blocks do not produce shear or tensile deformation at all. Use the middle hinge frame to fix the assembly and fix the front and rear frames together. Add new oil or grease to the lubrication points of the roller.
4. Wrap the air filter, dust outlet, exhaust pipe opening, etc. with plastic or the like, which will help prevent moist air from entering the engine body. Also, keep your fuel tank filled to avoid condensation and rust. Also remember to fill the hydraulic tank to the top mark.
