1. Choose a suitable parking location
Flat ground: Try to park the Road Roller on a flat, solid and obstacle-free ground, and avoid parking on a slope or soft ground.
Stay away from traffic roads: Avoid parking the Road Roller on busy roads to avoid affecting traffic or being hit by other vehicles.
2. Use triangular wooden blocks
Fix the wheels: Place triangular wooden blocks under the front and rear wheels of the Road Roller to prevent the vehicle from sliding accidentally. The triangular wooden blocks should be placed on both sides of the wheels to ensure the stability of the vehicle.
3. Set up warning signs
Reflective warning signs: Place reflective warning signs around the Road Roller, especially at night or in low-light environments. Reflective warning signs should be placed in front, behind, left and right of the Road Roller to ensure that they can be seen from all directions.
Warning lights: If the Road Roller is equipped with warning lights, make sure the warning lights are turned on. If there are no warning lights, portable warning lights can be placed around the Road Roller, especially when parking at night.
Fluorescent vest: If inspection or maintenance is required during parking, the operator should wear a fluorescent vest to improve visibility.
4. Other warning measures
Pull up the handbrake: Make sure the handbrake of the Road Roller is in the pulled state to increase the stability of the vehicle.
Shut down the engine: After parking, the engine should be turned off and the key should be removed to prevent unauthorized personnel from starting the equipment.
Lock the equipment: If possible, use a lock to lock the Road Roller to a fixed object to prevent the equipment from being stolen or accidentally moved.
Clean up the surrounding environment: Make sure there are no debris or obstacles around the Road Roller to avoid affecting the warning effect.
5. Additional measures for long-term parking
Cover the equipment: If the Road Roller needs to be parked for a long time, the equipment should be covered with a waterproof and dustproof cover to prevent the equipment from getting wet or contaminated.
Regular inspection: Even if the equipment is parked for a long time, the status of the equipment should be checked regularly to ensure that the equipment is in good condition.
